NEC NC2000C DLP cinema projector

Designed for auditoriums with screens up to 65-feet wide, NEC's NC2000C DLP cinema projector captivates audiences with crisp video images. Delivering precise 2K (2048 x 1080) resolution, 3-D capabilities and high contrast images (2200:1), this model is easy to operate, extremely user-friendly and requires minimal maintenance.

3D content utilizes the projector's full 2K resolution using triple flash technology for smooth motion

Memory functions for lens position and lamp output simplify frequent operation

Lamp changes can be made from the back of projector

Direct selection buttons for eight stored projector configurations

Projector can be controlled from an optional touchscreen

Auto lamp brightness control maintains constant brightness by adjusting the lamp power as it ages

Standard film projector lamps can be used (lamp adapter required

Projection Method

3-chip DMD reflection method

Primary Lenses

For 0.98” DLP Chip: 1.3 to 1.75:1 zoom / 1.4 to 2.05:1 zoom / 1.59 to 2.53:1 zoom / 1.9 to 3.25:1 zoom / 2.4 to 3.9:1 zoom / 3.9 to 6.5:1 zoom

Lens Adjustment Functions

Motorized focus, zoom, horizontal/vertical shift, light shutter (dowser) / Lens memory stores lens setting (shift/zoom/focus) / Range of shift is dependent on lens

Light Output

18,300 lumens when using NEC 4.0KW highefficiency Xenon lamp bulb

Contrast Ratio

2200:1 (full on/off)

Resolution

2048 x 1080

Lamp Bulbs

NEC high-efficiency Xenon (NEC 4.0KW lamp bulb / NEC Long life Xenon (NEC 4.0KW lamp bulb)

Supported Screen Size (maximum)

65 ft. / 20m

Cooling Method

Liquid cooling inside, air cooling with dustpreventing electrostatic filter

Total thermal dissipation: 18800BTU (Input 4KW power to NEC 4.0KW lamp bulb)

Projector exhaust: Top mounted

Demand of exhaust duct: 460CFM (13m3/min)

FanNoise

< 62dB

Power Consumption

Projector power supply unit: 500W

Lamp power supply unit: 5000W

Total: 5500W

DMD Specifications

0.98” DLP chip, 12º tilt angle

Input Terminals

HD-SDI port [BNC] x 4 / DVI port [DVI-digital] x 2

External Control

LAN port [RJ-45] x 1 / USB port [Type A] x 1 / Serial port (RS-232C) [D-sub(9-pin) x 1 / General Purpose I/O [D-sub (37-pin)] x 1 / General purpose I/O for 3D (D-sub [15-pin] x 1) / Remote control connector x 1

Power Supply Voltage

C1 Connection

Projector and Lamp power supply unit:

200 to 240V AC, 50/60Hz, single phase

C2 Connection

Projector power supply unit:

100 to 240V AC, 50/60Hz,single phase

Lamp power supply unit: 200 to 240V AC, 50/60Hz, single phase

External Dimensions

27.6 x 39 x 19.80 in. / 700 x 990 x 503mm

Excluding lens, lens hood and exhaust stack. Including feet.

Weight

218 lbs. / 99 kg

Excluding lens and lamp bulb.

Environment

Operational temperatures: 50-95°F / 10-35°C

Humidity: 10% - 85% (non-condensing)

Storage temperatures: 14-122°F / -10 50°C

Humidity: 10% - 85% (non-condensing)

Regulations

USA: UL60950 FCC Class A / Canada: CSA60950 ICES-003 Class A / Europe: EN60950 EN55022 1988. Class A/EN55024-1998/EN61000-3-11/EN61000-3-12 (Marking: TUV-GS, CE) / Oceania: EN60950 AS/NZS3548 Class A 1995/+A 1/2:1997 / Japan: J60950 VCCI Class A (Marking PSE, S-TUV) / Asia: EN60950 CISPR Pub22 / Korea: K00022 Class A/K00024/K61000-3-11 (Marking IMC)

Limited Warranty (parts & labor)

2 years

Ships With

User manual

Optional Accessories

Wide converter lens (NC-80LS13F)

Electric turret for NC-80LS13F

Built-in alternative content processor (MM3000B)

HDCP-compliant DVI input board (MM-70DV01)

Analog/RGB input board (MM-RGB)

Single HD-SDI input board (MM-SDI)

Video input board (MM-Video)

6xA/filter with every lamp replacement (NC-80AF01)

4xA/filter for exchange every 4000-5000 hours (NC-80AF02)

Lens 1.2-1.8 (NC-60LS12Z)

Lens 1.4-2.05 (NC-60LS13Z)

Lens 1.4-2.05 (NC-60LS14Z)

Lens 1.59-2.53 (NC-60LS16Z)

Lens 1.9-3.25 (NC-60LS19Z)

Lens 2.4-3.9 (NC-60LS24Z)

Lens 3.9-6.5 (NC-60LS39Z)